Image
image
image
image


Wireless Crane Anemometers:

The Crane Store is a authorized distributor for Load Systems International/LSI crane instruments that are affordable yet highly accurate instruments.


The MBR Series Displays

MBR100_Manual_ENG_rev1.2.pdf

$690.00 US/LSI MBR Series Multi-Sensor Display
 

MBR105_Manual_ENG_rev1.2.pdf

$747.00 US/LSI MBR Series Multi-Sensor Display
 

Features:
  • The MBR Series Displays monitor: load, angle, wind speed, wind gust, trim angle, list angle, rope payout, rope speed, pressure
  • Wireless handheld (MBR100) version or cab-mounted vehicle-powered (MBR105)
    version available
  • Ambient operating temperature range: 5°F to 122°F (-15°C to 50°C)
  • Lockout function available with MBR105 cab-mounted version
  • Monitor the load value for underhook load systems
  • Open/close for safe storage and screen protection
  • Attach to optional neck lanyard or wrist strap
  • Monitor a sensor using Listening Mode without modifying the current RF network
  • Backlight for night visibility
  • Radio range (line of sight): 4,260 ft (1,300 m)
  • One 0.7A lockout output (MBR105 only)
  • Operates with four "AA" cell batteries, alkaline or lithium, or NiMH rechargeable batteries (MBR100 only)
  • ISM license free radio; wavelength and modulation optimized for radio communication in industrial environments
  • Available with 902-928 MHz FCC band or 866-868 MHz CE band radio frequency
  • IP65 rated composite enclosure
  • User settable limits for alarms
  • Max Peak function when programmed with load sensors
  • Compatible with Trimble Lifting Solutions wireless sensors and transmitters:
    GC Series Load Cells, GLC Series Load Cells, GS001 Load Transmitter, GS010 Angle Sensor, GS020 Wind Speed Sensor, GS026 Wind Speed Sensor, GS005 Anti-Two-Block Transmitter, GS075-B Anti-Two-Block Switch, PT00100 Pressure Transducer, GS110/GS112 (angle only) and GS007 Line Riding Tensiometer Transmitter

LSI GS026 Radio Anemometer

LSI GS025 Anemometer/Wireless Wind Sensor

LSI Wireless Wind Sensor LSI Wireless Wind Sensor

 

 

Features:

  • The low-cost wind speed monitoring solution for a diverse range of applications and industries
  • Retrofits onto the mounting bracket of the previous model of LSI wind speed sensor for an easy upgrade
  • FCC and CE certified
  • Communication range of 4,600 feet / 1,400 meters
  • Compatible with The GS820, GS550 & GS320 Displays and with the Gateway Router
  • Measurement range of 0 to 150 mph / 0 to 241.4 km/h
  • Typical accuracy: +/- 3 mph (+/- 4.8 km/h)
  • User-replaceable wind cup assembly
  • Inexpensive replacement wind speed heads
  • Simple and easy battery change:
    • Turn the battery cap 90° and remove the cap
    • Replace the battery with a new one
    • Replace the battery cap
  • Up to 4 years of battery life under normal operation
  • Features a 1-year warranty
  • GS026 User Manual

 You need to buy both units below to have a complete system.

$400.00 US / LSI GS026 Radio Anemometer

$595.00 US / LSI GS320 Wireless Wind Speed Display

LSI GS026 WIND SPEED SENSOR DATASHEET

LSI GS026 WIND SPEED SENSOR BROCHURE 


LSI GS320 Wireless Wind Speed Display

LSI GS320 Wireless Wind Speed Display

  • Features:

    • Displays the current wind value on a large, brightly lit LED display
    • Users can set a wind speed alarm level
    • The LSI Wind Speed System consists of: GS320 Wind Speed Display/Receiver, Display Power Cable and the Anemometer you chose to purchase. I added some hardware to help in mounting the anemometer.
    • Users can display wind speed units in mile per hour or meters per second
    • Line of sight communication range: 4,000 feet (1,300 meters)
    • Has the ability to output a lockout signal to engage hydraulic solenoid valves (or output the alarm signal to an external light or siren)
    • LSI GS Series Displays and Sensors feature accurate and reliable Direct Sequence-Spread Spectrum-Two Way Communication
    • Users can order extra displays that work in “listening mode” (In “listening mode,” an unlimited number of displays can listen to ONE wind speed sensor. For example, if you have a refinery application and you buy one wind speed sensor and place it at the highest point, you can then have an unlimited number of displays spread out monitoring distance and showing the wind speed value on each display from the single wind speed sensor.)
    • To save battery life, when the display is powered off the wind sensor goes into “listening mode” and will not transmit until the display is turned back on
    • Powered by 1 D-Cell Lithium Battery
    • Up to 2 years battery life
    • Standard accuracy is 3%, with the option of an NIST traceable version (with 1% accuracy)
    • Display voltage input is 10-30 volts
    • 2 year warranty against defects
    • Display Dimensions: 4.7” tall X 3.7” wide X 1.125” deep
    • Display ships with ram mounting bracket allowing for easy positioning of the display
$595.00 US / LSI GS320 Wireless Wind Speed Display

LSI GS320 WIND SPEED DISPLAY BROCHURE

LSI GS320 WIND SPEED DISPLAY DATASHEET 

 





 

 


image
image